Description:
Product Specifications Output: Continuous current 30A, short-time current 40A (less than 10 seconds); Power input :2-3 cells lithium battery or 5-9 cell NiMH / NiCd battery pack; BEC Output: 5V @ 2A (linear regulator mode-linear mode); Maximum speed: 2-pole motors 210 000 rev / min, 6-pole motor 70000 rev / min, 12 pole motor 35 000 rev / min; Size: 68mm (length) * 25mm (W) * 8mm (high); Weight: 37g;
INTRODUCTION
Product Features
Safety Arming Feature: power, regardless of the throttle stick position, the motor will not start immediately, to avoid injury;
Throttle Calibration: Throttle range can adapt to different differences, improve throttle response linearity;
Programmable Items (available throttle stick or card LED parameter settings):
● Brake Settings: brake enabled / brake;
● Battery type: Lithium Battery / NiMH;
● Low Voltage Protection Mode: Soft Shutdown / hard shutdown;
● Low Voltage Protection Threshold: low / medium / high;
● Boot mode: Normal / Soft / Super-Soft startup;
● Timing: low / medium / high;
● Restore the factory defaults;
Comprehensive protection functions:
● Undervoltage protection: set by the user through the process, when the battery voltage is below the protection threshold, the ESC automatically reduce the output power;
● Overvoltage protection: input voltage exceeds the allowable range will not start, automatic protection, also issued a rapid "beep beep" alarm sound;
● Overheat protection: Built-in temperature sensing circuit, the ESC automatically when the temperature is too high reduce the output power;
● remote control signal loss protection: remote control signal is lost one second after power down, then there two seconds to turn off without the remote control signal output
Safety Arming Feature: power, regardless of the throttle stick position, the motor will not start immediately, to avoid injury;
Throttle Calibration: Throttle range can adapt to different differences, improve throttle response linearity;
Programmable Items (available throttle stick or card LED parameter settings):
● Brake Settings: brake enabled / brake;
● Battery type: Lithium Battery / NiMH;
● Low Voltage Protection Mode: Soft Shutdown / hard shutdown;
● Low Voltage Protection Threshold: low / medium / high;
● Boot mode: Normal / Soft / Super-Soft startup;
● Timing: low / medium / high;
● Restore the factory defaults;
Comprehensive protection functions:
● Undervoltage protection: set by the user through the process, when the battery voltage is below the protection threshold, the ESC automatically reduce the output power;
● Overvoltage protection: input voltage exceeds the allowable range will not start, automatic protection, also issued a rapid "beep beep" alarm sound;
● Overheat protection: Built-in temperature sensing circuit, the ESC automatically when the temperature is too high reduce the output power;
● remote control signal loss protection: remote control signal is lost one second after power down, then there two seconds to turn off without the remote control signal output